[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[efax-users] Sender detect an error but Receiver-efax detect no actual error



Hello,

This is the first post.
I have used efax on Debian Linux for 10 years. There have been no
problem for several years, but I have just encountered two problems.
This is one of them. I will post another one by separate subject.

When using version 0.9a-001114(Debian 1:0.9a-19), efax received 3 pages
fax normally but the counterpart detected an error and tried to send
them again.

Here is the log;
efax: Mon Oct 1 17:23:25 2007 activity detected
efax: 23:26 waiting 120.0 s
efax: 23:26 .356 [<CR><LF>RING<CR><LF>]
efax: 23:26 waiting 120.0 s
efax: 23:28 .831 [<CR><LF>RING<CR><LF>]
efax: 23:28 waiting 120.0 s
efax: 23:37 .122 [<CR><LF>+FCON<CR><LF>]
efax: 23:38 .714 [<CR><LF>+FTSI: " 0422 41 xxxx"<CR><LF>]
efax: 23:39 .014 [<CR><LF>+FDCS: 1,5,0,2,0,0,0,1<CR><LF>]
efax: 23:39 .138 [<CR><LF>OK<CR><LF>]
efax: 23:39 response "OK"
efax: 23:39 fax call answered
efax: 23:39 remote ID -> " 0422 41 xxxx"
efax: 23:39 command "+FDR"
efax: 23:39 waiting 60.0 s
efax: 23:42 .086 [<CR><LF>+FCFR<CR><LF>]
efax: 23:44 .862 [<CR><LF>+FDCS: 1,5,0,2,0,0,0,1<CR><LF>]
efax: 23:44 .874 [<CR><LF>CONNECT<CR><LF>]
efax: 23:44 response "CONNECT"
efax: 24:16 received 2310 lines, 0 errors <===== 1st page OK!
efax: 24:16 waiting 16.0 s
efax: 24:16 .354 [<CR><LF>+FPTS: 1,2219,0,0<CR><LF>]
efax: 24:17 .666 [<CR><LF>+FET: 0<CR><LF>]
efax: 24:17 .778 [<CR><LF>OK<CR><LF>]
efax: 24:17 response "OK"
efax: 24:17 Warning: reception errors
efax: 24:17 command "+FPTS=2"
efax: 24:17 waiting 3.0 s
efax: 24:17 .930 [<CR><LF>OK<CR><LF>]
efax: 24:17 response "OK"
efax: 24:18 command "+FDR"
efax: 24:18 waiting 60.0 s
efax: 24:21 .773 [<CR><LF>+FTSI: " 0422 41 xxxx"<CR><LF>]
efax: 24:27 .937 [<CR><LF>+FDCS: 1,4,0,2,0,0,0,1<CR><LF>]
efax: 24:27 .949 [<CR><LF>CONNECT<CR><LF>]
efax: 24:27 response "CONNECT"
efax: 24:27 remote ID -> " 0422 41 xxxx"
efax: 25:00 received 2309 lines, 0 errors <===== 2nd page OK!
efax: 25:00 waiting 16.0 s
efax: 25:00 .029 [<CR><LF>+FPTS: 1,2219,0,0<CR><LF>]
efax: 25:01 .337 [<CR><LF>+FET: 0<CR><LF>]
efax: 25:01 .445 [<CR><LF>OK<CR><LF>]
efax: 25:01 response "OK"
efax: 25:01 Warning: reception errors
efax: 25:01 command "+FPTS=2"
efax: 25:01 waiting 3.0 s
efax: 25:01 .589 [<CR><LF>OK<CR><LF>]
efax: 25:01 response "OK"
efax: 25:01 command "+FDR"
efax: 25:01 waiting 60.0 s
efax: 25:05 .417 [<CR><LF>+FTSI: " 0422 41 xxxx"<CR><LF>]
efax: 25:11 .572 [<CR><LF>+FDCS: 1,3,0,2,0,0,0,1<CR><LF>]
efax: 25:11 .584 [<CR><LF>CONNECT<CR><LF>]
efax: 25:11 response "CONNECT"
efax: 25:11 remote ID -> " 0422 41 xxxx"
efax: 25:38 received 2310 lines, 0 errors <==== 3rd page OK!
efax: 25:38 waiting 16.0 s
efax: 25:38 .829 [<CR><LF>+FPTS: 1,2219,0,0<CR><LF>]
efax: 25:40 .129 [<CR><LF>+FET: 2<CR><LF>]
efax: 25:40 .237 [<CR><LF>OK<CR><LF>]
efax: 25:40 response "OK"
efax: 25:40 Warning: reception errors <====== Is this a problem ?????
efax: 25:40 command "+FPTS=2"
efax: 25:40 waiting 3.0 s
efax: 25:40 .393 [<CR><LF>OK<CR><LF>]
efax: 25:40 response "OK"
efax: 25:40 command "+FDR"
efax: 25:40 waiting 60.0 s
efax: 25:43 .628 [<CR><LF>+FHNG: 0<CR><LF>]
efax: 25:44 .264 [<CR><LF>OK<CR><LF>]
efax: 25:44 response "OK"
efax: 25:44 read value 0 from " 0"
efax: 25:44 command "Q0V1"
efax: 25:44 waiting 2.0 s
efax: 25:44 .512 [<CR><LF>OK<CR><LF>]
efax: 25:44 response "OK"
efax: 25:44 command "Z"
efax: 25:44 waiting 5.0 s
efax: 25:45 .876 [<CR><LF>OK<CR><LF>]
efax: 25:45 response "OK"
efax: 25:45 done, returning 0 (success)

I suppose this problem has shown since 2003 (Debian1:0.9a-11,12 or 13).

Regards,
Tomoo Nomura

-- 
****** Nomura Technical Management Office Ltd. *****************
 Tomoo Nomura      nomura@xxxxxxxxx       http://www.tmo.co.jp/
    Phone: +81-78-797-0240 Fax: +81-50-3428-2033
 Worldwide Airline Timetable 'Flight Planner'
 European Electronic Timetable 'HAFAS'         ValueFax Support
****************************************************************